Belkin F5D5130-5 Ethernet 5 Port Networking Switch Review

Average Reviews:

(More customer reviews)The Belkin F5D5130-5 Ethernet 5 Port Networking Switch
by Belkin Components was one of the easiest installs I have experienced with Windows XP Home Networking. Belkin supplies all the software for your install. I have used other swithches that I ran into all kinds of problems with, but not with the Belkin F5D! This can save you a couple of hours!

Click Here to see more reviews about: Belkin F5D5130-5 Ethernet 5 Port Networking Switch

5-port network switch

Click here for more information about Belkin F5D5130-5 Ethernet 5 Port Networking Switch

Read More...

Cisco-Linksys EFAH08W EtherFast 8-Port 10/100 Auto-Sensing Hub (Desktop) Review

Average Reviews:

(More customer reviews)First of all, the current picture of a black hub is mistaken - the box looks like the other current linksys routers / hubs with the bright blue and black plastic box design.
That having been said, this hub worked perfectly out of the box. It is used to network among machines running Windows 98, Windows 2000, and Linux, using a variety of ethernet cards (3Com, Linksys, NetGear). It has been used several weeks now without a problem. Setup took minutes!
Besides this item, I have bought and used several Linksys products before, including several 4-port hubs, a 4-port router, PC network cards and a laptop card. All of these have worked flawlessly with the other network equipment I have used. In some cases they replaced an item that cost 3-6 times more yet did not work as well!
I noticed some other users have had issues with this product, so here are a few pointers about networking that might help:
1) Hubs allow computers to talk to connect to each other on a local network. All a hub does is allow a computer which is set up to be on the network to talk to another computer.
2) To create a local network that can talk to the internet, you either need to buy an IP address for every machine and use a hub, or use a router to allow multiple computers on the internal network to look to anyone on the internet as having a single IP address. (Don't forget the cable/DSL connection & modem.)
3) The maximum speed that the hub supports may be 100 Mbps, but the speed is limited by the speed of the ethernet card as well! Some ethernet cards are only rated for 10Mbps - so that is the maximum connection speed you'll get using them.

Click Here to see more reviews about: Cisco-Linksys EFAH08W EtherFast 8-Port 10/100 Auto-Sensing Hub (Desktop)

The EtherFast 10/100 Auto-Sensing Hubs from Linksys provide a fast and economical way to build or extend an enterprise 100 Mbps network. This eight-port hub lets you connect computers, workstations, servers, or other nodes in seconds. Every port of the hub automatically adjusts to either 10 Mbps or 100 Mbps speeds, allowing you to mix 10BaseT and 100BaseTX hardware together any way you like--all on the same hub. Combine low-cost 10 Mbps computers with high-speed Fast Ethernet workstations, and save money by putting 100 Mbps hardware only where you need it most.

Get 9% OFF

Click here for more information about Cisco-Linksys EFAH08W EtherFast 8-Port 10/100 Auto-Sensing Hub (Desktop)

Read More...

Cisco-Linksys EW5HUB Ethernet 5-port Workgroup Hub Review

Average Reviews:

(More customer reviews)This hub has been the core of my home network for over a year. Solid performer, works with all sorts of mongrelized 10 base T wiring. Uplink "shares" fifth port, only moderately successful in attaching 5 devices and an uplink.
Very small and light, if you are thinking of taking a hub on the road with your laptop.

Click Here to see more reviews about: Cisco-Linksys EW5HUB Ethernet 5-port Workgroup Hub

MODEL- EW5HUB DESC.- LINKSYS Networking FEATURES- Ethernet 5-Port 10BaseT Hub Installation is easy: just plug a twisted-pair cable between the hub and your computers and go! Connecting more than 5 computers together? No problem! Link up to 3 Workgroup Hubs together with the built-in uplink port for fast and flexible expandability when you need it. Auto-partitioning technology automatically separates faulty network lines from the rest of the network protecting your datas integrity. Includes intelligent LEDs that instantly show your networks line status data traffic levels and link states making trouble shooting easier than ever. Ready to run with most network software and fully compliant with all industry Ethernet standards. * Runs at 10Mbps * Ready to Run with All Major Network Software & Hardware * Easy-to-Read LED Indicators * Auto Partitioning Protects PCs from Downed Network Lines * VLSI & SMT for Hardware Reliability STANDARD(s) - IEEE 802.3 CONNECTORS - ( 5) 10BaseT/RJ45 ports ( 1) 10BaseT shared uplink port INDICATORs - LEDs for Link/Activity Collision Power. MANUFACTURER WARRANTY: 5 YEARS

Click here for more information about Cisco-Linksys EW5HUB Ethernet 5-port Workgroup Hub

Read More...

SMC SMCGS8 8-port 10/100/1000 Layer 2 Gigabit Desktop Switch, blue/silver plastic Review

Average Reviews:

(More customer reviews)I'm a big fan of SMC products and this one is no exception. For a little more money than their competitors they give you a more solid, more capable device. In this case, it is support for jumbo frames that sets them apart. You really need jumbo frames to take full advantage of Gigabit Ethernet and as far as I know, SMC is the only company including that feature in their consumer-grade switches.
I've used this for about 6 months now with not a single glitch or problem to report. The only drawbacks are cosmetic: the non-rectangular form makes stacking a bit of a problem, and it is so light that the ethernet cables connected to it tend to push it around.

Click Here to see more reviews about: SMC SMCGS8 8-port 10/100/1000 Layer 2 Gigabit Desktop Switch, blue/silver plastic

The EZ Switch 10/100/1000 SMCGS8, 8-port Gigabit Ethernet Switch, is the perfect solution for bottlenecks on your home or SOHO network. Bottlenecks are the inevitable result of data-intensive applications like home movies or digitial images and more computers being connected. The switch provides a seamless migration to higher-speed networking while solving bandwidth issues. It is designed to allow simultaneous transmission of multiple packets via high-speed data channels. This unmanaged, gigabit switch supports Plug-and-Play installation, with auto-MDIX on every port. This means that no more crossover cables are required, every port can either be connected to a PC or another switch for network expansion. The switch does not require fans making it ideal for home and SOHO networks. Meeting today´s diverse networking needs at an attractive price per port, the SMCGS8 is ideal for bringing speed and bandwidth to the desktop at home or in the office. Limited Life Time Warranty. 24/7 Technical Support 1-800-SMC-4YOU.

Get 21% OFF

Click here for more information about SMC SMCGS8 8-port 10/100/1000 Layer 2 Gigabit Desktop Switch, blue/silver plastic

Read More...

Cisco SD2008 8-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Signifiant changes have occurred over the life of this switch. Version 1 had an internal fan and was quite noisy, albeit cool running. Version 2 & 2.1 eliminated the fan. However capacitor C251, sitting next to an internal heatsink is prone to failure after 6 - 8 months, resulting in dropped packets and link connections. Version 3.0 has solved this problem with a complete re-layout of the printed circuit board (PCB), with a redesign of the power/voltage regulation. The new version, still fanless, runs MUCH cooler than version 2.1.

Click Here to see more reviews about: Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Harness the full power of your network with the Cisco SD2008 8-Port Gigabit Switch thatprovides nonblocking, wire-speed switching for your 10-, 100-, and 1000 megabit (Mb) network clients, all from the comfort of your desk. Formerly Linksys Business Series, now Cisco Small Business Unmanaged Switches, the SD2008 Desktop Switch allows the connection of up to 8 separate devices into your network - computers, printers, and servers - to share and transfer files and videos across your network.World-famous Cisco reliability and limited lifetime warranty gives you peace of mind.

Get 13% OFF

Click here for more information about Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Read More...

NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub Review

Average Reviews:

(More customer reviews)Net gear is owned by by Bay Networks, which does not make rinky dink equipment.
This hub has solid metal construction, sockets in the front, and lots of flickering lights that show the tranfer speed, and show who is connecting at either 10 or 100 Mbs. We use it to share one (adelphia 2-way cable) internet connection among 6 PCs, along with files and printing. No problems so far.
This hub handles the standard hub task with ease, and with a utilitarian aesthetic quality that you won't see in 3com's white plastic. 3Coms tries to disguise their hub as an external modem- why?
(p.s. I'm confused as to why 3Com's 8-port 10/100 hub costs over twice as much)

Click Here to see more reviews about: NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub

The Netgear DS-108 10/100Mbps Dual Speed Hub connects multiple PCs to share printers, files, Internet access, and e-mail communications. You can mix and match 10 and 100 Mbps PCs, servers, and peripherals with this hub, all without any configuration required. The DS100 family combines many capabilities in a compact package and is designed for cost-conscious small-business users.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 Mbps and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 100 Mbps traffic and 10 Mpbs traffic do not unnecessarily crowd each other.

Click here for more information about NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub

Read More...

Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button Review

Average Reviews:

(More customer reviews)I purchased this hub as part of a network starter kit (2 PCI ethernet cards + hub) and had no problems installing it. I run both Unix/Linux and Windoze machines and wanted all machines to be networked even with a mix of operating systems running at the same time -- and that meant simultaneous internet access, multi-player games, shared printers, etc. Basically, I wanted the network to do everything, so that any family member could sit down at a machine and do what they needed to do.
The DS-104 hub delivered from the time I installed it until the day I replaced it with a router (RT-314, also from Netgear). Installation was a snap, and as soon as I turned it on, I never had a moment's trouble from the DS-104.
So why did I switch? In two words, performance and price. Although the DS-104 is a fine product, its multiuser performance simply can't compare to a switch (which was built-in to the RT-314 router I replaced it with). I noticed that performance suffered when all of us wanted to use the computers simultaneously, which got me thinking about alternatives to improve performance. I initially intended to replace the DS-104 with a switch. After checking prices, I realized that I could actually purchase a router (switch + hardware firewall) for less than the cost of a switch alone. I eventually went that route, after receiving outstanding service from the DS-104 hub.
So was this purchase a throw-away? Hardly. The DS-104 did what it promised to do, reliably and without fuss. It handles both 10 and 100 Mbps connections transparently, so you don't even need to know the speed of whatever you're connecting. It's well-constructed (metal case instead of plastic) and absolutely reliable. Although I've replaced the DS-104 with a router, I haven't gotten rid of it -- I'm saving it for the day when I need to add several machines to the network and I'm out of ports on my router.
The DS-104 is solid, dependable networking at a very reasonable price. Recommended.

Click Here to see more reviews about: Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

The Netgear DS-104 4-Port 10/100Mbps Dual Speed Hub connects multiple PCs to share printers, files, Internet access, and e-mail communications. You can mix and match 10 and 100 Mbps PCs, servers, and peripherals with this hub, all without any configuration required. The DS100 family combines many capabilities in a compact package and is designed for cost-conscious small-business users.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 Mbps and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 100 Mbps traffic and 10 Mpbs traffic do not unnecessarily crowd each other.

Click here for more information about Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

Read More...

Cisco SD205 5-port 10/100 Switch Review

Average Reviews:

(More customer reviews)This Linksys SD205 switch rules. First, its mesmerizing because its the same size as the Ipod. Second, it does what its advertised such as connecting other computers together and most importantly, it regenerates signal. I was seriously considering buying a repeater, but they cost a couple hundred dollars. Technically, a hub is supposed to do the same thing but who wants that passive crap. The signal in my network started to attenuate and needed regeneration. This badboy fixed it and its back to full strength. I highly recommend this product if you are needing a component to branch out your network.

Click Here to see more reviews about: Cisco SD205 5-port 10/100 Switch

This newly-redesigned Linksys 5-Port 10/100 Switch can significantly increase your network traffics speed. A switch serves the same function as a hub in a network design -- tying your network equipment together. But unlike a simple-minded hub which divides the networks bandwidth among all the attached devices, a switch delivers full network speeds at each port. Installing this cost-effective 5-Port 10/100 Switch can potentially increase your network speed by five times. It is the perfect way of integrating 10Mbps Ethernet and 100Mbps Fast Ethernet devices, too. All five ports are auto speed negotiating, and have automatic MDI/MDI-X crossover detection, so you dont have to worry about the cable type. Each port independently negotiates for best speed and half- or full-duplex mode, for up to 200Mbps of bandwidth per port.

Click here for more information about Cisco SD205 5-port 10/100 Switch

Read More...

Leviton 47611-5GB 10/100/1000 Gigabit 5-Port Switch, White Review

Average Reviews:

(More customer reviews)It's the best option for in a media panel since it can mount to the panel. If I didn't have a panel. I wouldnt have bought this one. There are cheaper options out there.

Click Here to see more reviews about: Leviton 47611-5GB 10/100/1000 Gigabit 5-Port Switch, White

10/100/1000 Mbps 5-Port Gigabit Switch on a bracket. Retail pkd 1/small box, 2/carton

Click here for more information about Leviton 47611-5GB 10/100/1000 Gigabit 5-Port Switch, White

Read More...

Cables To Go 15194 Cat5E 350 MHz Snagless Patch Cable, Green (7 Feet/2.13 Meters) Review

Average Reviews:

(More customer reviews)I use these in the workplace for workstation connections and patch cables at the switch. They work well, plug in & unplug easily and seem fairly durable. We never re-use cables once used, so this has been an economical solution that performs.

Click Here to see more reviews about: Cables To Go 15194 Cat5E 350 MHz Snagless Patch Cable, Green (7 Feet/2.13 Meters)

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Get 55% OFF

Click here for more information about Cables To Go 15194 Cat5E 350 MHz Snagless Patch Cable, Green (7 Feet/2.13 Meters)

Read More...

Wired Home TLNS RJ45 Two Line Network Splitter Pair Review

Average Reviews:

(More customer reviews)You can't use this product to split the Internet line to connect two separate devices. What you are looking for is a Router or a Switch. Internet signal is a digital signal with a designated IP (Internet Protocol) address. Each Network device has to have a unique IP address and a DHCP server to releases that IP address. This device only splits the signal. It dose not assign IP addresses or act as a DHCP server.

Click Here to see more reviews about: Wired Home TLNS RJ45 Two Line Network Splitter Pair

More electronics are internet-enabled than ever before-gaming consoles, satellite receivers, televisions, and DVRs offer even more features when connected to the internet, and require a unique IP address and network connection for use when connected to a router. Most Base 10/100 Ethernet networks installed in homes require only two pairs of conductors for operation, allowing two different network connections over one Category cable. Wired Home network line splitter/combiners take advantage of this and enable two network connections be made over a single cable, effectively doubling the amount of network connections possible in your installation without re-running cable. Each network splitter/combiner features RJ45 input/output ports, and a cabled RJ45 output plug. System labeling placards and connection insert identifiers are included.

Get 26% OFF

Click here for more information about Wired Home TLNS RJ45 Two Line Network Splitter Pair

Read More...

NETGEAR FS108 ProSafe 8-Port 10/100 Desktop Switch Review

Average Reviews:

(More customer reviews)The NetGear FS108 is a great Fast Ethernet switch for small workgroups, featuring a sturdy construction (from the metal casing to the RJ45 connectors) and excellent performance. Packet forwarding rates are what you would expect for under 10 dollars per port, and I experienced no problems whatsoever in hooking up machines with many different brands of network cards. Even mixing cards with different speed ratings caused no issues, unlike with some other cheap 10/100 Ethernet switches I could mention. The only concerns I have with this unit are that it sometimes seems to forward certain unicast packets to all switch ports for no apparent reason, and that it runs extremely hot, as another review already mentioned.
As for some negative points mentioned by the other reviews: the switch works just fine with non-Windows machines (I would expect someone running multiple OSes to be able to troubleshoot simple connectivity issues, without resorting to technical support, which typically tends to be "Windows only" for pretty much *any* product...) and, while indeed not supporting full-duplex 100Mb/s non-blocking switching across all ports concurrently, this is not something you would expect from a workgroup-class switch anyway, nor something most users will ever need.
In short, if you're looking for an affordable way to build a well-performing small 10/100BaseT network, the NetGear FS108 is the way to go!

Click Here to see more reviews about: NETGEAR FS108 ProSafe 8-Port 10/100 Desktop Switch

The NETGEAR FS108 ProSafe 8-Port 10/100 Desktop Switch provides your local area network (LAN) with reliable 10/100 Mbps auto-sensing connectivity for eight users.
Sturdy and Reliable Design NETGEAR's FS100 series desktop switches are housed in a compact sturdy metal case designed without the need for internal fans, keeping operation both silent and more reliable. It can be placed on a flat surface or you can use the included wall mount kit.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto negotiation, which automatically obtains the fastest possible connection, and Auto Uplink takes care of the MDI/MDI-X connection. There are no toggle switches or special crossover cables. If your network has existing 10BASE-T devices, they will work seamlessly within a higher bandwidth environment with each port achieving its full speed.
Every port supports up to 200 Mbps in dedicated bandwidth. Automatic flow control ensures smooth traffic. The FS108 has 96 KB of buffer memory and an address database size of 1,000. The switch has status LEDs for power, and link, speed, and activity for each port.
The NETGEAR FS108 ProSafe 5-Port 10/100 Desktop Switch has a Mean Time Between Failure of 168,300 hours and is backed by a lifetime warranty. The power adapter is backed by a 2-year warranty.
What's in the Box FS108 Desktop Switch, wall-mount kit, power adapter, quick installation guide, warranty/support information card.

Get 36% OFF

Click here for more information about NETGEAR FS108 ProSafe 8-Port 10/100 Desktop Switch

Read More...

Cables To Go 22704 Cat5E 350 MHz Assembled Patch Cable (25 Feet/7.62 Meters, Green) Review

Average Reviews:

(More customer reviews)There isn't much that can go wrong with this kind of item, but I'm still pleased with the quality of the cable and connectors. The cable has been used in a challenging physical and electromagnetic environment for a few years now without a hitch. It was a good value at the time I bought it too. Great color -- I get tired of beige, black, and gray all the time.

Click Here to see more reviews about: Cables To Go 22704 Cat5E 350 MHz Assembled Patch Cable (25 Feet/7.62 Meters, Green)

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: \' 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) \' 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN \' 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM \' Voice

Get 87% OFF

Click here for more information about Cables To Go 22704 Cat5E 350 MHz Assembled Patch Cable (25 Feet/7.62 Meters, Green)

Read More...

D-Link DI-704 Internet Gateway and Firewall with 4 Port Switch Review

Average Reviews:

(More customer reviews)This is a neat little router idealy for a small home network. It comes with four RJ45 10/100 ports on the front and a connection in the back for a DSL or cable modem. Two CAT-5 cables were included as well.
I have a networking background, but the quickstart guide has screen shots for Windows95/98 and easy to follow instructions. I was already using DHCP to connect to my cable modem, so I didn't need to change any settings to use this router. I literally plugged it in, restarted, and was up and running with one Windows 95 and one Windows 98 computer....
The advanced options can be setup via your web browser. It supports such options as NAT firewall protection (you can limit which ports are accessed), DMZ host (allows one computer to operate without the "protection" of the firewall), set the IP range and domain name for DHCP, and change access rights for different computers. It also has a "virtual server" which lets you rout services to different computers such as HTML to one, FTP to another, etc.

Click Here to see more reviews about: D-Link DI-704 Internet Gateway and Firewall with 4 Port Switch

Designed for home or small-business PCs, the D-Link DI-704 is a broadband gateway with four switched Fast Ethernet ports that delivers complete hardware firewall protection for a PC. Allowing multiple computers to share one IP address to access the Internet via a cable or DSL modem, the DI-704 provides four 10/100 dual-speed Ethernet ports and one 10/100 Mbps Ethernet port for a cable or DSL modem or other broadband access device. The DI-704 can support up to 32 computers with firewall protection using the same ISP through its Dynamic Host Configuration Protocol (DHCP) that provides dynamic allocation of IP addresses.
Installing the system is easy: simply plug the DI-704 into your DSL or cable modem, then plug your computer's Ethernet cable into the DI-704.
The DI-704 acts as a natural firewall to protect your computer from intruders. Once your computer is set up to access the Internet through the DI-704, your network is invisible behind the DI-704. However, because some games and Internet applications work only with direct computer interaction, you can open specific ports to operate without the protection of the firewall to ensure that these applications will run properly.
Advanced options, including NAT firewall protection, DMZ host, setting the IP range and domain name for DHCP, and changing access rights for different computers, can be set up via your Web browser. Compliant with IEEE 802.3 standards, the DI-704 works with any Ethernet device and multiple types of machines and operating systems.
D-Link provides a lifetime warranty on the DSL/cable gateway and four-port switch.

Click here for more information about D-Link DI-704 Internet Gateway and Firewall with 4 Port Switch

Read More...

Cisco SR224 24-port 10/100 Switch - 13-inch chassis Review

Average Reviews:

(More customer reviews)For the price, I guess this switch is ok. The first one I bought starting have trouble with the port on it. Ports would just go dead and I'd have to switch the cable at that port to another open port.
I called support serveral times and spoke with different technicians, but no one could get the switch to work correctly on those dead ports. They were supposed to email me RMA instructions, which I never got. I called multiple times to get the RMA instructions, but each time I called they wanted diag my switch again!
Needless to say, I ended up buying a second one, which has been working. I still have never gotten LinkSys to give me an RMA on the first. So it's sitting in its box - big waste of money.
The reason I gave this product a 4 star is because it works when it works. My only real gripe was the support. In the future I'll probably be looking somewhere else for a switch.

Click Here to see more reviews about: Cisco SR224 24-port 10/100 Switch - 13-inch chassis

With its advanced switching technology, the Linksys 24-Port 10/100 Switch will boost your network performance with much more than just full duplex data transfer and dedicated bandwidth. It features non-blocking, wire-speed switching that forwards packets as fast as your network can deliver them. Also included are Address Learning and Aging to prevent data transfer errors and Data Flow Control to help prevent packet collisions.You have several installation options. The Switchs compact size fits onto your desktop, or use the wall mount slots to hang it somewhere out of the way. If your network equipment is in a rack, install it using the included rack mount brackets. No matter how intensive your network demands, the Linksys 24-Port 10/100 Switch has speed, flexibility, and reliability that you can count on.

Get 13% OFF

Click here for more information about Cisco SR224 24-port 10/100 Switch - 13-inch chassis

Read More...

Cisco SD2005 5-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Real quickly, I'm a network administrator for one of the largest websites in the US, so I'm not clueless when it comes to these devices. Like all the positive reviewers here, I was very happy with this unit when I first bought it. Worked like a charm, fast, cheap - what more could I ask for? Well how about a unit that didn't go belly up due to Linksys cutting corners on parts?
Apparently some versions of the SD2008 and SD2005 had fans, but they have been cut out. Now these little buggers overheat, and when they do, it can cause capacitors to go bad which basically kill it's ability to operate in gigabit mode. In fact, several of my computers (and I've tried all sorts of NICs/computer combos) just repeatedly drop connection in a neverending loop. Nice work Linksys.
I've read on forums that many others have the exact same problem - usually takes months for it to show up. One guy actually tore his apart, and saw the blistered/bulging components that had overheated and replaced them (hope you're handy w/a soldering iron.)

Click Here to see more reviews about: Cisco SD2005 5-port 10/100/1000 Gigabit Switch

The 5-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each users requirements. Either way, its perfect for graphics, multimedia, and other applications that have to move large files across the network quickly. With the 5-Port 10/100/1000 Gigabit Switch, you can connect your existing 10/100 Ethernet network to a Gigabit server backbone without any additional equipment.

Click here for more information about Cisco SD2005 5-port 10/100/1000 Gigabit Switch

Read More...

Cables To Go 24814 Cat5E 350 MHz Snagless Patch Cable, Gray (1 Feet/ 0.3 Meters) Review

Average Reviews:

(More customer reviews)Price was very good with speedy delivery. Would cost about 10 times as much at a RS store

Click Here to see more reviews about: Cables To Go 24814 Cat5E 350 MHz Snagless Patch Cable, Gray (1 Feet/ 0.3 Meters)

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Get 53% OFF

Click here for more information about Cables To Go 24814 Cat5E 350 MHz Snagless Patch Cable, Gray (1 Feet/ 0.3 Meters)

Read More...