Average Reviews:
(More customer reviews)The others have said it as well as I can. I agree with almost everything written (except the brief 2 line review that says it stinks). But here is my pro/con/comment report:
Pros: Very easy to setup. Very easy to install SATA drives (no cables, just slide in like a hot-swappable scsi drive). NO CLIENT SOFTWARE needed to map drives (just connect to \\nas200\sharename). Web based configuration so no software needed to manage. Option to power down hard drives after 10/20 minutes of inactivity, then another option to power down internal fan 10/20 minutes AFTER hard drives power down (to allow case to cool, I guess. This option makes the unit completely silent when not in use (this wasn't mentioned in other reviews). Inserting a USB hard drive (even one previously formatted as NTFS) results in instant detection, AND instant default share created (\\nas200\disk_1_1 for USB1). (to remove the usb external drive while the NAS is running press the small eject button next to the appropriate USB port. If you pull the cable or shut down the external drive, the NAS needs to be reset to see ALL shares). RAID1 option for protecting that precious data (it recommends configuring as individual drives, but no way would I do that. Why wouldn't you select RAID1 if available? Protect those precious family pictures, guys!). Small footprint, stacks with other linksys gear (routers, switches, APs, etc). Option to automatically shutdown every day or a given day of week at a set time. As nice as that is, the fact that the drives and then fan shutdown after inactivity makes it quiet and power saving anyway. Smaller and quieter and easier than using a separate computer (if you were considering making a Linux file "server" out of that spare tower case you had lying around). You don't need client software to map drives, however, the included client software, if you choose to install it, is very helpful and makes mapping drives very easy (adds a system tray icon to quickly map/unmap drives). Also, the software lets you attach the external USB drives from the NAS as if they were local USB drives (which I thought was very cool).
Cons: somewhat slow. I did 6GB in 30 minutes, so figure over an hour for 10-12GB of data over the 100Mb network. I think people are expecting too much from FastEthernet. Especially if you are using wireless! Here are the numbers: 100Megabits per second = 12.5megabytes per second = 750megabytes/minute = 45,000megabytes/minute = 44(real)Gigabytes/minute (assume 40 because FastEthernet really only gets around 90Mb/s in real world). So this unit is running around 25Mb instead of 100. But I wouldn't throw it out because of that. Also, if you are on wireless, well then your network is only really going around 12Mb/s at its best (over 802.11g) real world numbers. To display the list of files in an explorer window sometimes takes 10-20 seconds (but sometimes the files pop right up in a few seconds). When you have gigabit file sharing at work, the NAS is excruciatingly slow. No support for usb printer (the SLUG unit that linksys sells, basically this device with only 2 external USB drive support, has an active community writing Linux firmware that adds all kinds of features, including print server and firewall. I wonder if anyone is working on open source firmware for the nas200?). I digress. More cons: no provision to backup internal drives to external drives (another item on my Linux wishlist). For some reason, I thought that was mentioned on the spec sheet. If you pull an external drive, all shares disappear and you have to power cycle the unit. Takes almost 2 minutes to boot up. No option to power down external USB drives after inactivity, so even when the nas200 fan and internal drives shutdown, the external drives are still humming along. Not as feature rich as making a Linux file server out of that spare computer case you have lying around ;-).
Conclusion: I like the unit. I think it's really 3.5 stars. Its a little slow, but quiet and small, and it holds as much as you put in (I got two 320GB SATA drives, $80 each). If the USB ports could be print servers, that would be one less device in my linksys "stack". If the box could automatically backup internal drives to the external USB, that would be a little more peace of mind. I use it as my picture, document, and MP3 primary storage. The raid1 protects my data, and I use external USB drives to backup (but it's combersome because I simply map drive letters to both the internal drives and the external drives, then copy from one to the other. It would be nice if that feature was built-in). Its nice to have a unified file storage system at home, where I have 4 laptops and a desktop (for gaming :-), and to do it for about $300. Considering the small outlay, its worth getting to fool around with. If in the end, the speed is too slow for your home/SOHO network...you are only out $140 (and you can put the SATA drives in your beefy gaming rig).
Click Here to see more reviews about: Cisco-Linksys Network Storage System with 2 Bays (NAS200)
Now you can quickly and easily add storage space onto your network with the Linksys Network Storage System. This stand-alone network appliance features two available SATA hard drive bays so you can attach as much storage as you need now, and add more later as your storage needs grow. For even more expandability, there are two USB ports that let you connect readily available USB 2.0 hard drives for even more storage space -- or plug in a USB flash disk for a convenient way of accessing your portable data files.
Click here for more information about Cisco-Linksys Network Storage System with 2 Bays (NAS200)
