Average Reviews:
(More customer reviews)I'm using this with a 1 watt alfa usb adapter and a 24 dbi gain directional antenna (both available on Amazon) and it works great. I have full signal which I don't think I would have using a lesser grade cable at 50'. I'd recommend this to anyone that needs this long of a cable.
Click Here to see more reviews about: 3COM LMR-400 Ultra Low Loss ULA 50-Foot Antenna Cable. N Male & RP-SMA Male (Plug - No Pin) connectors. Connects an external antenna to WiFi , Router, Radio or Antenna
Ultra Low Loss Cable is designed to transmit the maximum signal to your antennas. 1/2 inch ULA-400 cable meets Military Specifications with silver foil and silver coated copper conductors for less signal loss in runs up to 200 feet.. In this high quality cable, the dimensions and spacing of the conductors are uniform. Any abrupt change in the spacing of the two conductors along the cable tends to reflect radio frequency power back toward the source, causing a condition called standing waves, reducing the amount and quality of the transmitted power. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. Manufacturers specify a minimum bend radius, to prevent kinks that would cause reflections. You should allow three inches of cable to make a 90 degree turn in your runs without causing signal loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. The transmission of energy in the line occurs totally through the dielectric inside the cable between the conductors. This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. This cable uses N connectors with sealed RP insert adapter changing connector types for maximum flexibility. ' 3Com Corporation was founded on June 4, 1979 in the San Francisco Bay Area by Bob Metcalfe, the principal inventor of a networking protocol called Ethernet. The name, 3Com, combines the things the company sought to bring together: Computer, Communications and Compatibility. 3Com is committed to helping its customers achieve their business goals with solutions that provide a more rewarding experience for end-users.
0 comments:
Post a Comment